Produce exponential steps for assembler code
Tessellated Circuits: Home => Old Home => Exponential steps  

Splitting 220...440 into 12 levels, last added.

Step factor = 1.0595, which is the 12th root of 2.

IndexComputedRoundedHex % of FS Error 
1 220.0000 220  [00DC] 50.000%   0.000%
2 233.0819 233  [00E9] 52.955%   0.035%
3 246.9417 247  [00F7] 56.136%   0.024%
4 261.6256 262  [0106] 59.545%   0.143%
5 277.1826 277  [0115] 62.955%   0.066%
6 293.6648 294  [0126] 66.818%   0.114%
7 311.1270 311  [0137] 70.682%   0.041%
8 329.6276 330  [014A] 75.000%   0.113%
9 349.2282 349  [015D] 79.318%   0.065%
10 369.9944 370  [0172] 84.091%   0.002%
11 391.9954 392  [0188] 89.091%   0.001%
12 415.3047 415  [019F] 94.318%   0.073%
13 440.0000 440  [01B8] 100.000%   0.000%

13 values produced.

To change any values, modify entries below:

Start value:
 
End value:
 
Number of steps?
 
Add a zero at beginning?

Add top value at end?

Remove low numbers?
(Use threshold = %)
Remove duplicates?

Decrement top by one?

Assembler's define byte prefix?
 (If blank, no assembler table produced.)

    
  

If you wish to comment on this application, click on over to my contacts page , and please do so (check the sample apps button there to let me know which aspect of the site you are communicating about).